Citizen Systems iDP-3210 User Manual

Browse online or download User Manual for Print & Scan Citizen Systems iDP-3210. Citizen Systems iDP-3210 User's Manual

  • Download
  • Add to my manuals
  • Print

Summary of Contents

Page 1 - User’s Manual

Rev. IssuedJapan CBM Corporation Information Systems Div. User’s ManualLine Thermal PrinterModel : iDP

Page 2

iDP-3210 User’s ManualCITIZEN10Ordinary Maintenancel Make sure to maintain the equipment after switching OFF the power .l When cleaning the platen o

Page 3 - IMPORTANT SAFETY INSTRUCTIONS

iDP-3210 User’s ManualCITIZEN11CONTENTS1. OUTLINE...

Page 4

iDP-3210 User’s ManualCITIZEN127. Drawer Kickout Connector...

Page 5 - <Cautions>

iDP-3210 User’s ManualCITIZEN13 1. OUTLINE This printer, a small-sized line thermal printer, has been developed to be applicable to various da

Page 6 - ! WARNING

iDP-3210 User’s ManualCITIZEN14(2) When using the printer, remove the protective paper of the thermal head in the following manner: 1) Open the pri

Page 7 - Precautions for installation

iDP-3210 User’s ManualCITIZEN152. BASIC SPECIFICATIONS2.1 Model Classification iDP3210 - R F 120

Page 8 - Caution for Handling

iDP-3210 User’s ManualCITIZEN162.2 Basic SpecificationsItem Description Printing system Line thermal dot printing system Print width 73.92 mm/448 do

Page 9 -

iDP-3210 User’s ManualCITIZEN172.3 Printing Paper Specifications2.3.1 Recommended PaperType : Thermal paperPaper width : 80 plus 0/minus 1 mmPaper thi

Page 10 - Ordinary Maintenance

iDP-3210 User’s ManualCITIZEN182.3.2 Printing position2.3.3 Head and Cutter Layout

Page 11 - CONTENTS

iDP-3210 User’s ManualCITIZEN19 3 OUTER APPEARANCE AND COMPONENTS

Page 12

iDP-3210 User’s ManualCITIZEN2 1996.08.02(10-DCL)15 Declaration of ConformityManufactur

Page 13 - 1. OUTLINE

iDP-3210 User’s ManualCITIZEN204.OPERATION4.1 Connecting AC Adapter(1) Turn off the power switch.(2) Holding the AC Adapter cable connector with its a

Page 14

iDP-3210 User’s ManualCITIZEN214.2 Connecting Interface Cable (1) Turn OFF the power switch. (Both for the printer and the host side.) (2) Confi

Page 15 - 2. BASIC SPECIFICATIONS

iDP-3210 User’s ManualCITIZEN224.3 Connecting Drawer Kickout Connector (1) Turn OFF the power switch. (2) Confirming the up and down side of the

Page 16 - 2.2 Basic Specifications

iDP-3210 User’s ManualCITIZEN234.4 Inserting the Paper Roll Cautions : Do not use a paper roll other than the one specified in this manual.

Page 17 - 2.3.1 Recommended Paper

iDP-3210 User’s ManualCITIZEN24 Cautions : In case the slack of paper remains, remove the slack by rolling up the roll paper. In case th

Page 18 - 2.3.3 Head and Cutter Layout

iDP-3210 User’s ManualCITIZEN254.5 How to Remove Remaining Roll Paper (1) Open the printer cover. (2) Holding the paper guide, pull it in the ar

Page 19

iDP-3210 User’s ManualCITIZEN26 Caution : Since print head and motor are hot, do not carry out this action right after printing. In case of m

Page 20 - 4.OPERATION

iDP-3210 User’s ManualCITIZEN274.7 Canceling Cutter Lock (1) As referring to "4.6 Removing Paper Jam", remove the roll paper remains insi

Page 21

iDP-3210 User’s ManualCITIZEN284.8 Cleaning Print Head (1) As referring to "4.6 Removing Paper Jam”, remove the platen rollerunit. (2) Usin

Page 22

iDP-3210 User’s ManualCITIZEN294.9 OPERATION PANEL AND DISPLAY OF ERROR(1) POWER LAMP (Green) With power switch is turned ON, this lamp lights up

Page 23 - 4.4 Inserting the Paper Roll

iDP-3210 User’s ManualCITIZEN3IMPORTANT SAFETY INSTRUCTIONSl Read all of these instructions and save them for later reference.l Follow all warnings

Page 24

iDP-3210 User’s ManualCITIZEN30Details of error Cover open : When printer cover is opened, printer cover open sensor detects the cover

Page 25 - 4.6 Removing Paper Jam

iDP-3210 User’s ManualCITIZEN315 Dip Switch Setting5.1 Location of Dip Switch (1) Turn OFF the power switch. (2) Remove the rear cover.(Remove i

Page 26

iDP-3210 User’s ManualCITIZEN325.2 Dip Switch SettingDS1 FUNCTION ON OFF FACTORY SETTING-1 Paper cutter Enabled Disabled ON-2 Cover open Disabled Enab

Page 27 - 4.7 Canceling Cutter Lock

iDP-3210 User’s ManualCITIZEN336. INTERFACE (Connecting with Peripheral Equipment)6.1 Parallel Interface6.1.1 Specifications Data input method :

Page 28 - 4.8 Cleaning Print Head

iDP-3210 User’s ManualCITIZEN346.1.3 I/O SIGNALS (1) Input Signals to the Printerl DATA : 8-bit parallel signal (positive logic)l STB

Page 29

iDP-3210 User’s ManualCITIZEN356.1.4 Electrical Characteristics (1) Input Signal Level All the input signals are at C-MOS level.

Page 30

iDP-3210 User’s ManualCITIZEN366.1.5 TIMING CHART(1) Data Input and Printing TimingT1, T2, T3 : 0.5λs MIN T4 : 270 ns MAX T5

Page 31 - 5 Dip Switch Setting

iDP-3210 User’s ManualCITIZEN376.2 Serial Interface6.2.1 Specifications(1) Data transfer system: Asynchronous (2) Baud rates 150, 300,

Page 32 - 5.2 Dip Switch Setting

iDP-3210 User’s ManualCITIZEN386.2.2 Connector’s Pin ConfigurationsNo. SIGNAL NAME I/O FUNCTION 1 FG Frame Grand 7 GND Signal GND 3 RD Input Receiving

Page 33 - 6.1 Parallel Interface

iDP-3210 User’s ManualCITIZEN396.2.3 I/O SIGNALS (1) RD Serial receiving data signal. On occurrence of framing error, overrun error, or parity e

Page 34 - 6.1.3 I/O SIGNALS

iDP-3210 User’s ManualCITIZEN4IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installedand used in accord

Page 35

iDP-3210 User’s ManualCITIZEN406.2.4 Data Configuration -------à tMarkSpace

Page 36 - 6.1.7 Buffering

iDP-3210 User’s ManualCITIZEN416.2.5 Error Detection Parity, framing, and overrun are detected. On detection of any error, the data are stored

Page 37 - 6.2 Serial Interface

iDP-3210 User’s ManualCITIZEN426.2.8 ELECTRICAL CHARACTERISTICS (1) RS-232C Circuit Input (RD, DSR) (Printer Side)

Page 38

iDP-3210 User’s ManualCITIZEN437. Drawer Kickout Connector7.1 Specifications(1) Drawer-Kick Drive SignalPulses specified by ESCp are output. Also, SW

Page 39 - 6.2.3 I/O SIGNALS

iDP-3210 User’s ManualCITIZEN448 POWER SUPPLY CONNECTOR SPECIFICATIONS This is the connector for power supply from exclusive AC Adapter. Con

Page 40 - 6.2.4 Data Configuration

iDP-3210 User’s ManualCITIZEN459 PRINT CONTROL FUNCTION9.1 Command ListCONTROL CODEFUNCTION PAGE 1 HT Horizontal tab command 2 CR Print command 3 LF P

Page 41 - 6.2.7 Buffering

iDP-3210 User’s ManualCITIZEN469.2 Command Details(1) Horizontal Tab Command (HT) Code : (09)hShifts the printing position to the next horizontal tab

Page 42

iDP-3210 User’s ManualCITIZEN47(5) Specifying Collectively the Print Mode (ESC ! n) Code: [1Bh] + [21h] + n ≤ * {0 ≤ n ≤ FF} The data is des

Page 43 - 7. Drawer Kickout Connector

iDP-3210 User’s ManualCITIZEN48(7) Defining Download Character (ESC & s n m a (D1D2 - Dn) Code: [1B]h + [26]h + s +n +m +a +Dn * {s = 02}

Page 44

iDP-3210 User’s ManualCITIZEN49 (8) Specifying the Bit Image Mode (ESC * m n1 n2 D1 - Dn) Code : [1B]h + [2A]h + m + n1 + n2 + Dn * {m=

Page 45 - 9 PRINT CONTROL FUNCTION

iDP-3210 User’s ManualCITIZEN5<Cautions>1. Before using the equipment, be sure to read this User’s manual thoroughly. Please keep this manual

Page 46 - 9.2 Command Details

iDP-3210 User’s ManualCITIZEN50(9) Specifying/ Canceling Underline (ESC - n) Code: [1B]h + [2D]h + n * {0 ≤ n ≤ 02} Data is described in Hex c

Page 47

iDP-3210 User’s ManualCITIZEN51(14) Specifying/canceling highlighting (ESC E n) Code : [1B]h + [45]h + n * {0 ≤ n ≤ FF} Data is described in

Page 48

iDP-3210 User’s ManualCITIZEN52(17) Selecting International Characters (ESC R n) Code : [1B]h + [52]h + n * {0 ≤ n ≤ 0A) Data is described

Page 49

iDP-3210 User’s ManualCITIZEN53 (20) Enabling/Disabling Panel Switch (ESC c 5 n) Code : [1B]h + [63]h + [35]h + n * {0 ≤ n ≤ FF} Data is

Page 50

iDP-3210 User’s ManualCITIZEN54 (23) Transmitting the printer status (ESC v) Code : [1B]h + [76]hCurrent printer status is transmitted..l Status s

Page 51

iDP-3210 User’s ManualCITIZEN55(25) specifying/Canceling Inverted Characters Code : [1B]h + [7B]h + n * {0 ≤ n ≤ FF} Data is described in H

Page 52

iDP-3210 User’s ManualCITIZEN56(26) Specifying/Canceling 90°-right- turned Characters (ESC V n) Code : [1B]h + [56]h + n *{0 ≤ n ≤ 1} Data i

Page 53

iDP-3210 User’s ManualCITIZEN57(29) Bar Code Printing (GS k n Dn NUL) Code : [1D]h + [6B]h + n + Dn + [00]h * {0 ≤ n ≤ 7} Data are descr

Page 54

iDP-3210 User’s ManualCITIZEN58(32) Selecting Printing Position of HRI Characters (GS H n) Code : [1d]H + [48]H + N * {0 ≤ n ≤ 3} Data is

Page 55

iDP-3210 User’s ManualCITIZEN59(35) Starting / Ending Macro Definition (GS :) Code : [1D]h + [3A]hSpecifying starting / ending macro definition. M

Page 56

iDP-3210 User’s ManualCITIZEN6! WARNINGl Do not subject this equipment to excessive force or shocks such as by treading on it, dropping itor hitting

Page 57

iDP-3210 User’s ManualCITIZEN60 (38) Data Input Control (ESC = n) Code : [1B]h + [3D]h + n * {0 ≤ n ≤FF} Data is described in Hex code.Sele

Page 58

iDP-3210 User’s ManualCITIZEN6110 CHARACTER CODE TABLE10.1 International (IBM Character #2)

Page 59

iDP-3210 User’s ManualCITIZEN6210.2 International Character Code Table

Page 60

iDP-3210 User’s ManualCITIZEN63Appendix 1 Outline Drawing1.1Outler Drawing of Printer (Model : iDP-3210)

Page 61 - 10 CHARACTER CODE TABLE

iDP-3210 User’s ManualCITIZEN641.2Outer Drawing of AC Adapter (Model : 30AD)

Page 62

iDP-3210 User’s ManualCITIZEN65Appendix 2 Block Diagram

Page 63 - Appendix 1 Outline Drawing

iDP-3210 User’s ManualCITIZEN7Precautions for installationl Do not install or store this printer near fire, water, a heater, in the direct sunshine i

Page 64

iDP-3210 User’s ManualCITIZEN8Caution for HandlingDo not carry out the following operation, since they may damage the printer.l Do not carry out blan

Page 65 - Appendix 2 Block Diagram

iDP-3210 User’s ManualCITIZEN9 This Caution label is attached in the following position.Make sure to use this equipment properly reading the caut

Comments to this Manuals

No comments