Citizen Systems iDP3420 User Manual download pdf (Page 35)

iDP3420/3421/3423 User’s Manual

19 CITIZEN

4.12 Operation Panel and Display of Error

1. POWER lamp (Green)

This lamp is illuminated when the power is supplied.

2. ERROR lamp (Red)

This lamp is illuminated or blinks to indicate each error.

Error Indication ERROR Lamp Buzzer Resetting Method

Mechanical Error Quick blinking Sounds continuously for

approx. 1 second

Reset the Power

switch.

Paper End Illuminated Repeats a short 3-time

sound twice at intervals of

0.5 second.

Set a new paper roll.

Paper Near End Blinks

(Once a second)

Repeats a short 3-time

sound twice at intervals of

0.5 second.

Set a new paper roll.

Cutter Motor Lock

(iDP3421/23 only)

Quick blinking

(Twice a second)

Sounds continuously for

approx. 1 second.

Eliminate a paper jam.

Mechanical Error : If the printer mechanism has a greater load due to a paper jam, etc., the buzzer

will sound and the ERROR lamp will blink to stop the printer mechanism.

Paper End : If the paper has run out, the paper sensor in the paper path near the print head

will detect the end of the paper roll, turn on the buzzer, and illuminate the

ERROR lamp to stop the printer mechanism. If the paper is inserted into the

paper path, the paper roll will be loaded. (See 4.7 Inserting the Paper)

Paper Near End : If the paper is running out, the paper near end sensor will be activated to turn on

the buzzer and make the ERROR lamp blink. Even after the paper near end is

detected, a command can be used to print by the specified number of lines. (See

a description on the command for setting the number of print lines after paper

near end detection)

Cutter Motor Lock : If the cutter position detection sensor in the cutter unit is left turned on or off

for approx. 1 second while the cutter motor is running, cutter operation and

printing will be suspended, determining it to be motor lock.

3. FEED switch

If this switch is pressed once for a short time, the paper will be fed

by 1 line. If it is held down, the paper will be fed continuously.

4. FEED switch and Power switch

When the power is turned on, the printer follows the operation flow

at "power-on" on the next page, depending on how the FEED switch

is operated.

POWER Lamp

ERROR Lamp

FEED Switch

(iDP3421/23 only)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 173 174

Comments to this Manuals

No comments

Citizen Systems iDP3420 User Manual Page 35

Comments to this Manuals

Related products and manuals for Print & Scan Citizen Systems iDP3420