Citizen Systems iDP-562 User Manual download pdf (Page 27)

iDP-562 User’s Manual

CITIZEN

7. Control Code

Control codes are the same for 7 BIT DATA and 8 BIT DATA except SI & SO code.

7.1 SI & SO Code

Symbol 8 BIT DATA 7 BIT DATA

SI Standard character designation (Same as US) Designation of SI side character

SO Enlarged character designation (Same as RS) Designation of SO side character

7.2 Function Code

Symbol Code Function

( Hexadecimal)

LF 0A Feeds a new line after printing.

CR 0D Feeds a new line after printing.

You can select CR function in accordance with

your computer's output. For details, refer to

5.5 Setting the Preset Jumper.

RS 1E Enhanced character designation.

The designation is released with US code or line feed.

US 1F Standard character designation.

FF 0C Carries out from feed performance after printing.

DC1 11 Makes the printer SELECT (ON-LINE) state.

Only this code can be accepted irrespective of

DESELECT (OFF-LINE) state.

DC2 12 Red printing is specified / released.

Designation / release (alternative) of red one line

printing is possible with this code.

DC3 13 Makes the printer DESELECT (ON-LINE) state.

Symbol Code Function

(Hexadecimal)

Designation / release of reverse printing.

DC4 14 Designation / release (alternative) of reverse printing

is possible with this code.

CAN 18 Clears the print data in the buffer.

Al the previous input data is cleared with this code.

Graphic print (correspondence with bit) mode designation.

*ESC + "K" 1B, 4B It is not possible to print graphic mode

and another character mode in one line.

ESC + "C" 1B, 43 Page length designation and paging action.

Refer to 7.3.

ESC + "0" 1B, 4F Paging is off

*ESC + "1" 1B, 31 2.75mm line spacing.

*ESC + "2" 1B, 32 5.5mm line spacing.

*Only for iDP562-RS and iDP562CN type.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

No comments

Citizen Systems iDP-562 User Manual Page 27