Citizen Systems iDP-562 User Manual Page 29
- Page / 35
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
iDP-562 User’s Manual
CITIZEN
29
4 Graphic Print Mode Designation
ESC(1B) K(4B) n1 n2 DATA
Input ESC K (1B 4B) at the top of the line and then input Graphic Print Data, which is converted to binary,
into n1. After that, input dummy data in n2.
If it is also the Graphic Print in the next line, ESC K n1 n2 should be input once again before the data.
The number for Graphic Print Data should be:
1 £ n1 £ 240
Any numbers other than the above comes to 240.
5 Graphic Print Data
Printing in seven lengthwise dots by 240 rows can be made in one line. The 7 lengthwise dots are input as the
graphic print data. The data are computed as follows:
® The position as traced from the home position
Correspondence of head pin to graphic print data
As will be understood from the above, the data are used in which the first dot corresponds to the first bit and
the 7
th
dot corresponds to the 7
th
bit. The 8
th
bit is disregarded. Try to select decimal data or hexadecimal data
matching to the host computer.
- User’s Manual 1
- IMPORTANT SAFETY INSTRUCTIONS 3
- 1. Outline 6
- 2. Basic Specifications 7
- 3 .Appearance and Parts Name 8
- 4. Operation 10
- 5. Serial Interface 13
- 6. Parallel Interface 22
- 7. Control Code 27
- 8. Initial Setting 31
- 9. Character Code Table 32
- (2) Foreign Character 33
- SI Side SO Side 34
- 10. Maintenance 35
Gefen Werkzeug Benutzerhandbücher
Beginnend mit G
Comments to this Manuals